brooks-sweep

sickn33/agentic-awesome-skills · plugins/agentic-awesome-skills-claude/skills/brooks-sweep/SKILL.md

Full-sweep mode: runs a unified analysis across all quality dimensions — code decay, architecture, tech debt, and test quality — then applies fixes directly to the codebase. Safe changes are auto-applied; risky changes are confirmed before execution. Drawing on twelve classic...

Software EngineeringMIT★ 45496⑂ 6664commit 5cf4dfe

Install skillView source on GitHub

What this skill does

Brooks-Lint — Full Sweep & Auto-Fix

When to Use

Use this skill when you need full-sweep mode: runs a unified analysis across all quality dimensions — code decay, architecture, tech debt, and test quality — then applies fixes directly to the codebase. Safe changes are auto-applied; risky changes are confirmed before execution. Drawing on twelve classic...

Setup

Read ../_shared/common.md for the Iron Law, Project Config, Report Template, and Health Score rules
Read ../_shared/source-coverage.md for book-level coverage, exceptions, and tradeoffs
Read ../_shared/decay-risks.md for production risk symptom definitions
Read ../_shared/test-decay-risks.md for test risk symptom definitions
Read sweep-guide.md in this directory for the unified scan and fix process

Process

If the user has not specified a project or directory: apply Auto Scope Detection from ../_shared/common.md to determine the review scope before proceeding.

Show pre-flight consent notice and wait for the user's one-time approval (Step 0 of the guide)
Enumerate scope and initialize the unresolvable / non_critical_rounds / fix_log state (Step 1 of the guide)
Run the four dimensions in sequence — review, test, debt, audit — each scanning, classifying, applying Safe + Extended-Safe fixes, and verifying via the project test command (Steps 2–5 of the guide)
Iterate: re-scan modified files + same-module + static consumers; converge on a clean round, retire 3-retry failures to the unresolvable set, cap non-critical rounds at 3 (Step 6 of the guide)
Aggregate residual and unresolvable items and output the Full Sweep Report (Steps 7–8 of the guide)

Mode line in report: Full Sweep

Limitations

Use this skill only when the task clearly matches its upstream source and local project context.
Verify commands, generated code, dependencies, credentials, and external service behavior before applying changes.
Do not treat examples as a substitute for environment-specific tests, security review, or user approval for destructive or costly actions.

Installation

Copy a source-pinned command for your client. You run it yourself.

Destination: .claude/skills/brooks-sweep · pinned to the source commit

# Run from your project root
git clone https://github.com/sickn33/agentic-awesome-skills.git .skillboard-tmp
git -C .skillboard-tmp checkout 5cf4dfeb13ea966daa1e117897689cd7991e3f44
mkdir -p ".claude/skills"
cp -r ".skillboard-tmp/plugins/agentic-awesome-skills-claude/skills/brooks-sweep" ".claude/skills/"
rm -rf .skillboard-tmp

Review the source before running. This copies files into your project; it is not a one-click install and does not verify runtime safety.

New here? Step-by-step setup – from installing the agent to using the skill

Operating systemAgentI already use Claude Code

1
Install Git
Install Git with your package manager (Debian/Ubuntu shown; use dnf/pacman on others). Official download.
```
sudo apt update && sudo apt install -y git
```
2
Install Claude Code
Requires Node.js 18+. Install the CLI globally: Official docs. (command-line tool)
```
npm install -g @anthropic-ai/claude-code
```

Get the skill, pinned to its exact version

Open a terminal and run these steps (they clone the source, check out the exact commit, and copy the skill into place):

# Run from your project root
git clone https://github.com/sickn33/agentic-awesome-skills.git .skillboard-tmp
git -C .skillboard-tmp checkout 5cf4dfeb13ea966daa1e117897689cd7991e3f44
mkdir -p ".claude/skills"
cp -r ".skillboard-tmp/plugins/agentic-awesome-skills-claude/skills/brooks-sweep" ".claude/skills/"
rm -rf .skillboard-tmp

Destination: .claude/skills/brooks-sweep

4
Use it in Claude Code
Open Claude Code in your project. It reads skills from the folder above, so brooks-sweep is now available. Always review the source before using it – static checks cannot prove runtime safety.

Security & Audits

Scanner static-checks@0.1.0 · commit 5cf4dfeb13ea. Static checks cannot prove runtime safety – review the source and the exact diff before installing. How checks work.

lowPath traversal reference
References parent-directory traversal, which can escape a target directory.
Evidence: ../· fingerprint fa08499e14d0113b

brooks-sweep

sickn33/agentic-awesome-skills · plugins/agentic-awesome-skills-claude/skills/brooks-sweep/SKILL.md

Software EngineeringMIT★ 45496⑂ 6664commit 5cf4dfe

Install skillView source on GitHub

What this skill does

Brooks-Lint — Full Sweep & Auto-Fix

When to Use

Setup

Read ../_shared/common.md for the Iron Law, Project Config, Report Template, and Health Score rules
Read ../_shared/source-coverage.md for book-level coverage, exceptions, and tradeoffs
Read ../_shared/decay-risks.md for production risk symptom definitions
Read ../_shared/test-decay-risks.md for test risk symptom definitions
Read sweep-guide.md in this directory for the unified scan and fix process

Process

If the user has not specified a project or directory: apply Auto Scope Detection from ../_shared/common.md to determine the review scope before proceeding.

Show pre-flight consent notice and wait for the user's one-time approval (Step 0 of the guide)
Enumerate scope and initialize the unresolvable / non_critical_rounds / fix_log state (Step 1 of the guide)
Run the four dimensions in sequence — review, test, debt, audit — each scanning, classifying, applying Safe + Extended-Safe fixes, and verifying via the project test command (Steps 2–5 of the guide)
Iterate: re-scan modified files + same-module + static consumers; converge on a clean round, retire 3-retry failures to the unresolvable set, cap non-critical rounds at 3 (Step 6 of the guide)
Aggregate residual and unresolvable items and output the Full Sweep Report (Steps 7–8 of the guide)

Mode line in report: Full Sweep

Limitations

Use this skill only when the task clearly matches its upstream source and local project context.
Verify commands, generated code, dependencies, credentials, and external service behavior before applying changes.
Do not treat examples as a substitute for environment-specific tests, security review, or user approval for destructive or costly actions.

Installation

Copy a source-pinned command for your client. You run it yourself.

Destination: .claude/skills/brooks-sweep · pinned to the source commit

# Run from your project root
git clone https://github.com/sickn33/agentic-awesome-skills.git .skillboard-tmp
git -C .skillboard-tmp checkout 5cf4dfeb13ea966daa1e117897689cd7991e3f44
mkdir -p ".claude/skills"
cp -r ".skillboard-tmp/plugins/agentic-awesome-skills-claude/skills/brooks-sweep" ".claude/skills/"
rm -rf .skillboard-tmp

Review the source before running. This copies files into your project; it is not a one-click install and does not verify runtime safety.

New here? Step-by-step setup – from installing the agent to using the skill

Operating systemAgentI already use Claude Code

1
Install Git
Install Git with your package manager (Debian/Ubuntu shown; use dnf/pacman on others). Official download.
```
sudo apt update && sudo apt install -y git
```
2
Install Claude Code
Requires Node.js 18+. Install the CLI globally: Official docs. (command-line tool)
```
npm install -g @anthropic-ai/claude-code
```

Get the skill, pinned to its exact version

Open a terminal and run these steps (they clone the source, check out the exact commit, and copy the skill into place):

# Run from your project root
git clone https://github.com/sickn33/agentic-awesome-skills.git .skillboard-tmp
git -C .skillboard-tmp checkout 5cf4dfeb13ea966daa1e117897689cd7991e3f44
mkdir -p ".claude/skills"
cp -r ".skillboard-tmp/plugins/agentic-awesome-skills-claude/skills/brooks-sweep" ".claude/skills/"
rm -rf .skillboard-tmp

Destination: .claude/skills/brooks-sweep

4
Use it in Claude Code
Open Claude Code in your project. It reads skills from the folder above, so brooks-sweep is now available. Always review the source before using it – static checks cannot prove runtime safety.

Security & Audits

Scanner static-checks@0.1.0 · commit 5cf4dfeb13ea. Static checks cannot prove runtime safety – review the source and the exact diff before installing. How checks work.

lowPath traversal reference
References parent-directory traversal, which can escape a target directory.
Evidence: ../· fingerprint fa08499e14d0113b

brooks-sweep

What this skill does

Brooks-Lint — Full Sweep & Auto-Fix

When to Use

Setup

Process

Limitations

Installation

Install Git

Install Claude Code

Get the skill, pinned to its exact version

Use it in Claude Code

Security & Audits

brooks-sweep

What this skill does

Brooks-Lint — Full Sweep & Auto-Fix

When to Use

Setup

Process

Limitations

Installation

Install Git

Install Claude Code

Get the skill, pinned to its exact version

Use it in Claude Code

Security & Audits